DJI Zenmuse L2 Lidar Camera / Gimbal

Sale price$12,430.00


DJI Zenmuse L2 Lidar Camera/Gimbal 

Fully compatible with the DJI Matrice 350, the Zenmuse L2 is a compact Lidar + RGB camera for Aerial Surveying.

Zenmuse L2 integrates frame LiDAR, a self-developed high-accuracy IMU system, and a 4/3 CMOS RGB mapping camera, providing DJI flight platforms with more precise, efficient, and reliable geospatial data acquisition. When used with DJI Terra, it delivers a turnkey solution for 3D data collection and high-accuracy post-processing.

RGB Mapping Camera

4/3 CMOS, Mechanical Shutter
Pixel size has been enlarged to 3.3 µm, and effective pixels now reach 20 MP, resulting in a significant improvement in overall imaging, as well as more enriched true-color point cloud details. The minimum photo interval has been reduced to 0.7 seconds. The mapping camera has a shutter count of up to 200,000 times, further reducing operational costs. When point cloud collection is not needed, the RGB camera can still take photos and videos, or collect images for visible light mapping.

DJI Zenmuse L2 Lidar - Florida Drone Supply

Supported by its powerful hardware, L2 can allow for a precise scan of complex subjects within an extended range and faster point cloud acquisition. During operations, users can preview, playback, and process point cloud models on-site, with Task Quality Reports generated by DJI Terra, offering a simple, one-stop solution to improve overall efficiency. This enables users to achieve high-precision point cloud results with one-stop post-processing.

Frame-Based LiDAR

30% Detection Range Increase

L2 can detect from 250 meters at 10% reflectivity and 100 klx, [3] and up to 450 meters at 50% reflectivity and 0 klx. [3] The typical operational altitude now extends up to 120 meters, notably enhancing operational safety and efficiency.

Smaller Laser Spots, Denser Point Clouds

With a reduced spot size of 4×12 cm @100m, only a fifth of that of L1, L2 not only detects smaller objects with more details, but can also penetrate denser vegetation, generating more accurate digital elevation models (DEM).

Supports 5 Returns

In densely vegetated areas, L2 can capture more ground points beneath the foliage.

Effective Point Cloud Rate: 240,000 pts/s

In both single and multiple return modes, L2 can reach a max point cloud emission rate of 240,000 points per second, allowing the acquisition of more point cloud data in a given time frame.

Two Scanning Modes

L2 supports two scanning modes, offering flexibility for users based on their task demands. In repetitive scanning mode, L2's LiDAR can achieve more uniform and accurate point clouds while meeting high-precision mapping requirements. In non-repetitive scanning mode, it offers deeper penetration for more structural information, making it suitable for power line inspection, forestry surveying, and other scenarios.

Frame-based Design

The frame-based design results in an effective point cloud data rate of up to 100%. Together with a three-axis gimbal, it brings more possibilities to surveying scenarios.


High Precision

Vertical Accuracy: 4 cm;
Horizontal Accuracy: 5 cm [1]

Exceptional Efficiency

2.5 km2 covered in a single flight [2]

Superior Penetration

Smaller laser spots, denser point clouds

Detection Range [3]

250m @10% reflectivity, 100klx
450m @50% reflectivity, 0klx

5 Returns

Turnkey Solution [4]

Point Cloud LiveView

One-Click Processing on DJI Terra
Integrated LiDAR Solution 

In The Box
(1) Zenmuse L2
(1) microSD Card (128GB)
(1) Lens Cap
(1) Storage Case
(1) Lens Cleaning Cloth


Matrice 350 RTK
Matrice 300 RTK

Only supports DJI RC Plus as the remote controller. Before using, please upgrade the firmware of the aircraft and remote controller to the latest version. To ensure mapping accuracy, make sure the L2 is mounted on a single downward gimbal connector with the cable connected to the right USB-C port (when facing the aircraft).

You may also like

Recently viewed